Coil Heaters

Dydac manufactures high watt density coil heater for various applications. These coil heater have compact structure, even heating (Watts per sq. inch are equal) and can be installed with ease.

Aparrt from that Dydac offers coil heaters which can be used for hot runner moulds, nozzle (sprue) bush and other applications.

For more details on Coil Heaters click here

Cartridge Heaters

Dydac Controls is engaged in manufacturing cartridge heater. The cartridge heater comprises of resister wire which is carefully placed in the heater and high-grade refractory material is used in makinng these wires.

For more details on Cartridge Heaters click here

Infrared Heaters

Infrared heat is transmitted directly in the form of electromagnetic ray, at a velocity of approx. 300,000 Km/Sec i.e. at the speed of light.

IR is therefore not only the fastest form of heat but aalso is suitable for particularly demanding applications such as vacuum technology and clean room applications.

For more details on Infrared Heaters click here

Coil Heater Cast in Brass

Beeco Coil heater Cast in Brass having an outer casing of stainless steel. Available with an added feature of built-in thermocouples its applications are similar to coil heaters such as hot runner nozzzles, die casting nozzles, tube exclusion and pipe forming, but have some advantages over the latter.

For more details on Coil Heater Cast in Brass click here

Mini and Micro Coil Heaters

Hitco Mini and Micro coil heaters are high performance heaters for smaller diameter nozzles, nozzle tips and can also be formed in grooves to create three dimensional heating applications. Due to the small diameter size these heaters are most frequently designed with a pressed on sheath, fitted into brass to serve as maximum heating source.

For more details on Mini and Micro Coil Heaters click here

Hi-Density Cartridge Heaters

Hitco manufacture our high density cartridge heaters using only high quality materials, which guarantees that they operate even under extreme conditions.

Major areas of use are tools heating in plaastics-plants, packaging-machines, foundry- technology, as well as medical devices.

For more details on Hi-Density Cartridge Heaters click here

Tubular Heaters

Hitco tubular heaters are the most versatile and widely used sources of electric heat for industrial, commercial and scientific applications. They can be designed in a wide range of electrical rating,, diameters, lengths, terminations, and sheath materials.

For more details on Tubular Heaters click here

Infrared Heaters

Hitco Short wave infrared heaters:
Infrared heat is transmitted directly in the form of electromagnetic rays, at a velocity of approx. 300,000 km / sec: i.e at the speed of light.

IR is therefore not only the faster form of heat, but is also suitable for particularly demanding applications such as vacuum technology and clean room conditions.

For more details on Infrared Heaters click here

Cartridge Heaters

Hitco Low density cartridge heaters:
This standard cartridge heater is a proven low cost solution for most heating applications its usage is however limited by the maximum surface loading upto 5 W/cmm2.

For more details on Cartridge Heaters click here

Cast In Heaters

For uniform heat distribution and efficiency Hitco manufactures cast heaters for better results. The high thermal conductivity of aluminum (aluminum bronze) allows precisely uniform temperature to be applied to the component surface, elevating hot or cold spots that may effect the equipments performance.

For more details on Cast In Heaters click here

Commercial Water Immersion Heaters for Geysers, Water Boiler

Hitco manufactures these heaters from Copper/SS tubing's brazed with Brass flange and duly nickel plated.
Caution: Must be fully immersed in water before putting in operation.

(For picture, pleasse see next page)

For More Details Contact Us:
Mr.

For more details on Commercial Water Immersion Heaters for Geysers, Water Boiler click here

Coil Type Nozzle Heater

Hitco Coil heaters are specially designed to prevent the failure of heaters against the leakage and contamination of plastic material at nozzle position. This heater can meet the higher temperature reequirement prior to moulding at nozzle position.

For more details on Coil Type Nozzle Heater click here

Mica Band Sealed (Nozzle) Type Heater

Hitco Band heaters are hermetically sealed for liquid plastic during the manufacturing process. The connection between the heating element and the leads is protected by a special fitting made of brasss/stainless steel 1 mm thick, with welding which allows a high mechanical strength in the most delicate area of the heater.

For more details on Mica Band Sealed (Nozzle) Type Heater click here

Hitco Nozzle Heaters

The heating of nozzle in injection machines is still a big problem owing to the costs incidence and subsequent stops in the production process.
Hitco analyzed a large series of cases causing an earlyy failure, most of them due to plastic leakage impregnating the heater and causing a range of effects as:
- Carbonization of material near electrical connection which causes short circuit
- Penetration of material into the heater will lead carbonizing it.

For more details on Hitco Nozzle Heaters click here

Immersion Heaters, Titanium Immersion Heaters,

Immersion Heaters:
Tubular immersion heating elements are formed into hairpins that are brazed to flange of size 11.5", 2", 2.5" or 3" in brass or SS material. Temperature can be controlled by using thermostat if required.

For more details on Immersion Heaters, Titanium Immersion Heaters,
Circulation Heaters click here

Mini Coil Heater and Hollow Type Cartridge Heater

Mini Coil Heater:
Mini coil heaters are used in nozzle for hot runner manifolds.

Technical specifications:
- Sheath material: SS304
- Insulation material: High purity
- Heating elements: NiCr 880: 20
- Voltage range: 220V to 240V
- Power rating: 168W to 300W
- Power tolerance: + 5 percent
- High voltage strength: Min.

For more details on Mini Coil Heater and Hollow Type Cartridge Heater click here

Micro Tubular Heaters

Ace Heat Tech offer micro tubular heater which are adapted to a variety of applications. This is because it can be formed into any shape. Micro tubular heaters are swaged and compacted with magnesium oxide and a helical or straight resistance element.

For more details on Micro Tubular Heaters click here

D Type Cartridge Heater / Split Type

Split or D type Cartridge heaters are designed specially for die or mold heating, where the holes are poorly drilled or worn out. The heaters expand and create intimate contact with wall of the hole. The heater transfer conductivity is excellent as the expansion is in the directions.

For more details on D Type Cartridge Heater / Split Type click here

Cartridge Heaters

Ace Heat Tech offers cartridge heaters both high watt and low watt density. These heaters are designed for a long life and outstanding performance.

Applications:
Cartridge heaters can be specifiedd to meet the demand of special applications:
- Moulds and dies.

For more details on Cartridge Heaters click here

Mica Band Heaters

Mica provides excellent dielectric strength and heat transfer capability for long heater life.
The precisely wound resistance element helps to quickly transfer the heater.
These are specifically dessigned with close ends to protect against contamination.

For more details on Mica Band Heaters click here

Ceramic Band Heaters

Ceramic band heater consists of helically wound resistance coil which is of Nickel Chrome wire.

This coil is passed through holes in specially designed ceramic bricks in such a way that coil is eveenly stretched and flexible ceramic heating mat gets formed.

For more details on Ceramic Band Heaters click here

Tubular Heaters

Tubular heating elements/ tubular heaters with or without heat dissipation fins, mounted on rectangular plate forms a heater bank. Heater bank mounted on frame or duct duly provided thermal insulationn.

For more details on Tubular Heaters click here

Ceramic Band Heaters

Widely used in plastic injection moulding machine, extruders moulding and blowing moulding. Our ceramic band heaters are made from high grade material. This heater has long life and can be used with hhigh density watts.

For more details on Ceramic Band Heaters click here

Machine Heaters

Ravi offer corrugated machine heaters that has tube diameter of 8.2mm. The heater is manufactured as per ISO standard specification 3074. Extra brass terminal is used to protect heating terminal and aavoid terminal burning.

For more details on Machine Heaters click here

D Section Cartridge Heaters

Round & D section cartridge heaters made from stainless steel or incoloy sheating tube. resistance coil evenly stretched for uniform heat and compacted in the MgO powder for maximum heat transfer and longer element life.

For more details on D Section Cartridge Heaters click here

Cartridge Heaters

Ravi offer cartridge heaters, which comprises of resister wire carefully placed in the heater. The resister wire is made from high-grade refractory material. Cartridge heater provides uniform heat disstribution around and over the length of the elements.

For more details on Cartridge Heaters click here

Flanged Immersion Heaters

Flanged immersion heaters consisting of hairpin type tubular heating elements silver brazed / TIG welded to threaded / round plate/ rectangular plate / flange suitable to be mounted on the side or topp of the tank or vessel.

For more details on Flanged Immersion Heaters click here

Water Immersion Heaters

Ravi offer commercial water immersion heaters in following specifications:

Type: CH/10/230
- Watts: 1000
- Voltage: 230
- Depth of immersion: 230 mm
- Flange: 1 1/4" BSPT

Type: CH/15/230
- Watts: 1500
- Voltage: 230
- Depth of immersion: 230 mm
- Flange: 1 1/4" BSPT

Type: CH/20/325
- Watts: 2000
- Voltage: 230
- Depth of immersion: 325 mm
- Flange: 1 1/4" BSPT

Type: CH/30/425
- Watts: 3000
- Voltage: 230
- Depth of immersion: 425 mm
- Flange: 1 1/4" BSPT

(For picture, please see next page)

For More Details Contact:
Ravi Enterprise
Mr.

For more details on Water Immersion Heaters click here

Oil Immersion Heaters

Ravi Enterprise offer commercial oil immersion heaters in following specifications:

Type: OIH / 10 / 438
- Watts: 1000
- Voltage: 230
- Depth of immersion: 438 mm
- Flange: 2 1/2" BSPT

Type:: OIH / 15 / 438
- Watts: 1500
- Voltage: 230
- Depth of immersion: 438 mm
- Flange: 2 1/2" BSPT

Type: OIH / 20 / 438
- Watts: 2000
- Voltage: 230
- Depth of immersion: 438 mm
- Flange: 2 1/2" BSPT

Type: OIH / 30 / 438
- Watts: 3000
- Voltage: 230 / 400
- Depth of immersion: 438 mm
- Flange: 2 1/2" BSPT

Type: OIH / 40 / 575
- Watts: 4000
- Voltage: 230 / 400
- Depth of immersion: 438 / 575 mm
- Flange: 2 1/2" BSPT

(For picture, please see next page)

For More Details Contact:
Ravi Enterprise
Mr.

For more details on Oil Immersion Heaters click here

Mini and Micro Coil Heaters

Hitco Mini and Micro coil heaters are high performance heaters for smaller diameter nozzles, nozzle tips and can also be formed in grooves to create three dimensional heating applications. Due to the small diameter size these heaters are most frequently designed with a pressed on sheath, fitted into brass to serve as maximum heating source.

For more details on Mini and Micro Coil Heaters click here

Hi-Density Cartridge Heaters

Hitco manufacture our high density cartridge heaters using only high quality materials, which guarantees that they operate even under extreme conditions.

Major areas of use are tools heating in plaastics-plants, packaging-machines, foundry- technology, as well as medical devices.

For more details on Hi-Density Cartridge Heaters click here

Ceramic Fibre Jackets Heater

Hitco offers High Temperature Fibre Glass Cloth for operations upto 500 degree C.
- 2 inch Thick Ceramic Fibre Blanket
- Aluminum/Teflon/Silicone Coated fibre Cloth
- S.S perforated Cover to Prottect Jacket from Mishandling (optional)

The Advantages and Standard features:
- Especially to heat the cylinders (barrels) on all types of plastic(s) processing machinery.

For more details on Ceramic Fibre Jackets Heater click here

Hitco Nozzle Heaters

The heating of nozzle in injection machines is still a big problem owing to the costs incidence and subsequent stops in the production process.
Hitco analyzed a large series of cases causing an earlyy failure, most of them due to plastic leakage impregnating the heater and causing a range of effects as:
- Carbonization of material near electrical connection which causes short circuit
- Penetration of material into the heater will lead carbonizing it.

For more details on Hitco Nozzle Heaters click here

Mica Band Sealed (Nozzle) Type Heater

Hitco Band heaters are hermetically sealed for liquid plastic during the manufacturing process. The connection between the heating element and the leads is protected by a special fitting made of brasss/stainless steel 1 mm thick, with welding which allows a high mechanical strength in the most delicate area of the heater.

For more details on Mica Band Sealed (Nozzle) Type Heater click here

Coil Type Nozzle Heater

Hitco Coil heaters are specially designed to prevent the failure of heaters against the leakage and contamination of plastic material at nozzle position. This heater can meet the higher temperature reequirement prior to moulding at nozzle position.

For more details on Coil Type Nozzle Heater click here

Commercial Water Immersion Heaters for Geysers, Water Boiler

Hitco manufactures these heaters from Copper/SS tubing's brazed with Brass flange and duly nickel plated.
Caution: Must be fully immersed in water before putting in operation.

(For picture, pleasse see next page)

For More Details Contact Us:
Mr.

For more details on Commercial Water Immersion Heaters for Geysers, Water Boiler click here

Cast In Heaters

For uniform heat distribution and efficiency Hitco manufactures cast heaters for better results. The high thermal conductivity of aluminum (aluminum bronze) allows precisely uniform temperature to be applied to the component surface, elevating hot or cold spots that may effect the equipments performance.

For more details on Cast In Heaters click here

Cartridge Heaters

Hitco Low density cartridge heaters:
This standard cartridge heater is a proven low cost solution for most heating applications its usage is however limited by the maximum surface loading upto 5 W/cmm2.

For more details on Cartridge Heaters click here

Infrared Heaters

Hitco Short wave infrared heaters:
Infrared heat is transmitted directly in the form of electromagnetic rays, at a velocity of approx. 300,000 km / sec: i.e at the speed of light.

IR is therefore not only the faster form of heat, but is also suitable for particularly demanding applications such as vacuum technology and clean room conditions.

For more details on Infrared Heaters click here

Tubular Heaters

Hitco tubular heaters are the most versatile and widely used sources of electric heat for industrial, commercial and scientific applications. They can be designed in a wide range of electrical rating,, diameters, lengths, terminations, and sheath materials.

For more details on Tubular Heaters click here

Heater-Cooler Assembly for Extrusion Machines

Hitco designs Super efficient and economical air-cooled ceramic band heater specifically for the blower air-cooling process/applications on extrusion machineries.
Heater band is 60% open by perforateed metal sheet, which ensure maximum surface exposure for better cooling.

For more details on Heater-Cooler Assembly for Extrusion Machines click here

Strip Heaters

These are available with or with out fins, the standard sizes readily available are 12, 18, 24, 30 with different wattages and sizes. However we do manufacture them as per customers needs. Also used aat lower wattage to remove the moisture content in the control panels, etc.

For more details on Strip Heaters click here

Cartridge Heaters

Cartridge heaters can be made in a variety of sheaths like stainless steel, brass and incolony. Various types of terminations can be provided. Cartridge heaters can be made in a variety of different llengths and diameters as per individual requirements.

For more details on Cartridge Heaters click here

Mica Band Heaters

Mica band heaters consist of resistance ribbon round wires wound over mica. Variety for different sheath materials like brass, stainless steel and mild steel can be provided. Mica bands are used for hheating of cylindrical parts up to 300 Degree C.

For more details on Mica Band Heaters click here

Ceramic Band Heaters

Ceramic Band Heaters:
Ceramic Band are manufactured by placing spirally wound nichrome 80/20 resistance wire coil in ceramic insulators and covered by outer stainless steel sheath. Ceramic bands can be used for heating of cylindrical parts up to 600 Degree C.

For more details on Ceramic Band Heaters click here

Twin Tube Short Wave Infrared Module

This is made up of 8-shape high-purity clear quartz twin tube, each tube has heating coil of tungsten material which runs in U shape in the tube which is filled with halogen gas.

- Power density uup to 150 kw/m2 is achieved.

For more details on Twin Tube Short Wave Infrared Module click here

Short Wave Infrared Heaters and Infrared Module

Short Wave Infrared Heaters:
Short wave IR lamp transmits heat in the form of electromagnetic waves at a velocity of approximately 3,00,000 Km/Sec i.e., at the speed of light.

These lamps are nott only the fastest in transmitting heat but are most suitable for specific applications involving vacuum technology and dust free (clean room) conditions.

For more details on Short Wave Infrared Heaters and Infrared Module click here

Twin Tube and Fast Medium Wave Infrared Heater

Twin Tube Medium Wave Infrared Heater
Our twin tube MW IR heater is made up of 8-shape high-purity clear quartz twin tube, with each tube having Ni-Chrome heating coil that runs in U shape in the tubbe.

For more details on Twin Tube and Fast Medium Wave Infrared Heater click here

Medium Wave Infrared Heaters and Heating Modules

Medium Wave Infrared Heaters:
We manufacture and supply superior quality medium wave infrared heater that consists of a helically wound resistance coil housed in a pure vitreous silica fused quartz ttube.

For more details on Medium Wave Infrared Heaters and Heating Modules click here

Super High Temperature Black Infrared Heaters

Super high temperature heaters were developed to increase the previous maximum possible surface rating of ceramic panel radiators from 64 kw/m2 to 77 kw/m2.

These radiators, produced using the holllow casting ceramic process, are filled with thermal insulation material and have a special black gaze and a gold-plated back.

For more details on Super High Temperature Black Infrared Heaters click here

Insulated and Thermocouple Ceramic Infrared Heater

Insulated Ceramic Infrared Heater:
Insulated ceramic infrared heater is a special type of heater with proper insulation on the backside with highly efficient heat insulation material. They have a verry long life even when used regularly.

For more details on Insulated and Thermocouple Ceramic Infrared Heater click here

Colour Changing and High Performance Infrared Heaters

Colour Changing Infrared Heaters:
This is a special type of infrared heater with color-changing feature. Along with a change is temperature the heater changes its color. This is helpful to the users in a sense that there is a visible indication of the level of temperature reached at any given point of time.

For more details on Colour Changing and High Performance Infrared Heaters click here

Ceramic and Ceramic Flat Infrared Heaters

Ceramic Infrared Heaters:
Our ceramic infrared heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates hhighly heatproof resistance wire that provides safety against my damage.

For more details on Ceramic and Ceramic Flat Infrared Heaters click here

Space Heaters Embedded Elements and Metal Casted Elements

The heat developed in the tubular element can be transmitted to the surroundings either by convection, conduction or radiation depending on the operating temperature and method of use. A large number of heating elements grouped together to heat the space are called space heater.

For more details on Space Heaters Embedded Elements and Metal Casted Elements click here

Cartridge Heaters

Cartridge heaters are used to heat dies for plastic packaging plants and various other applications. Cartridge heaters are smaller in sizes and are available in two types: high watt or low watt cartriidge heaters are basic to specific heating and are available in sizes from 6 mm O.

For more details on Cartridge Heaters click here

Tubular Heaters

Hitco tubular heaters are the most versatile and widely used sources of electric heat for industrial, commercial and scientific applications. They can be designed in a wide range of electrical rating,, diameters, lengths, terminations, and sheath materials.

For more details on Tubular Heaters click here

Infrared Heaters

Hitco Short wave infrared heaters:
Infrared heat is transmitted directly in the form of electromagnetic rays, at a velocity of approx. 300,000 km / sec: i.e at the speed of light.

IR is therefore not only the faster form of heat, but is also suitable for particularly demanding applications such as vacuum technology and clean room conditions.

For more details on Infrared Heaters click here

Cast In Heaters

For uniform heat distribution and efficiency Hitco manufactures cast heaters for better results. The high thermal conductivity of aluminum (aluminum bronze) allows precisely uniform temperature to be applied to the component surface, elevating hot or cold spots that may effect the equipments performance.

For more details on Cast In Heaters click here

Cartridge Heaters

Hitco Low density cartridge heaters:
This standard cartridge heater is a proven low cost solution for most heating applications its usage is however limited by the maximum surface loading upto 5 W/cmm2.

For more details on Cartridge Heaters click here

Tungsten Heater for Vacuum Metallizing

Tungsten heaters, made of tungsten wires, have high melting point and good corrosion resistance. They are mainly used for vacuum metallizing, such as heating elements for chrome scope, mirrors, plastiics and decoration articles.

For more details on Tungsten Heater for Vacuum Metallizing click here

Mica Band Heater

Hitco Mica band heater design is the result of many years of research, development and testing for a reliable mica insulated band heater that can perform at higher operating temperatures [in applicatiion up to 350° C] essential to process high temperatures resins, providing long, efficient service necessary for today's high productivity of plastic extruders, injection and blow molding machines.

For more details on Mica Band Heater click here

Ceramic Band Heater

Hitco Ceramic band Heaters are specifically designed and engineered to meet the ever increasing demand for energy conservation and to improve operation efficiency.

The continually increasing of thee technological developments in plastic processing requires machines components ever more reliable.

For more details on Ceramic Band Heater click here

Coil Heaters

Intelligent Solutions to Precision Heating
Especially for the plastic processing industry, Hitco offers a wide range of Coil Heaters with different wattage data and measurements.

Everywhere, where a precisely controlled and exactly managed heating wattage is needed, the coil heater offers a mature solution with far reaching possibilities to suit individual requirements.

For more details on Coil Heaters click here

Air heaters

Hitco offers air heaters 'U' type for baking chambers, ovens etc.

Air heaters are manufactured out of high temperature resistance chrome nickel steel tube to withstand a surface temperature upto 6600°C.

For more details on Air heaters click here

The Insulation Plus Power Saving Heaters

Hitco specially designed and engineered four models to meet the ever increasing demand for energy conservation and to improve operations efficiency, capable of generating higher temperatures essentiall to process today's high temperature resign.

For more details on The Insulation Plus Power Saving Heaters click here